DIY garden potting bench

For years one thing that has been missing from my garden was a potting bench. I knew I wanted one, but they weren’t something I could find in the stores and if I did they were very expensive. Over the years, I had considering making one myself. However, having never built anything before, I wasn’t sure I could do it. But this year I decided to throw caution into the wind and make my own DIY garden potting bench. After looking at random pictures of potting benches, I knew what I wanted mine to look like. As part of all of my May garden prep, I figured it was a good time to finally build this project

This post may contain affiliate links. This means that should you make a purchase after following one of these links, I may receive a small commission at no extra cost to you.

DIY garden potting bench

Supplies needed

Creating a design

The first step is to figure out how large you want your potting bench. Once you know that, you can start drawing a plan or do like I did and mostly wing it. The important thing is to make sure the height is best suited for the person who will be using it the most. I found that putting the benchtop at about waist height worked best. This way you don’t have to stoop down to plant in seed trays but also allow you to set large pots on it and still be able to effectively plant them. For my bench, I cut the front legs to 3 feet tall.

Another decision to make it whether you want is whether to add a shelf to the back supports. A shelf does come in handy for setting small pots and tools out of the way temporarily. Alternatively, you can have a board with hooks on it to hang your tools while not in use.

Because I was winging the design, I basically determined the height of the benchtop and then measured our random scraps to see how wide they would be. This determined how wide the support boards needed to be – which happened to work out to three feet.

Putting it together

Once you have your design figured out, it’s time for the fun part. Cutting all of the pieces. If you are a pro at using a saw, then this will be easy. However, if you are like me and this is your first build project, you will want to take it slow. I suggest grabbing a scrap piece of wood and making a few test cuts before cutting the pieces you need for the project. This way you don’t waste any of your wood. Since I was using scraps, a lot of the wood was already pre-cut, so I only needed to cut the front legs and the support pieces for the benchtops. This also means that my bench is a mixture of woods, mostly cedar and spruce.

Next, lay all of the pieces out to double-check that they were cut properly. Doing this will prevent having to tear apart your creation halfway through to fix any mistakes. Once satisfied that everything is correctly cut, it’s time to assemble.

This is the most time-consuming part of the project, especially if you are new to building or working alone.

I screwed together to support frames first, for both the top and bottom of the bench. For this, I drilled pilot holes with one drill and put the screws in with a second drill. This saved a lot of time because I wasn’t constantly changing bits. However, if you have a drill with a quick connect then it will be much easier. If you need extra help holding the boards together at this stage, a spreader clamp works well. From there, it was a matter of adding the benchtop boards. Because I planned to have the benchtop have a bit of overhang, I had to make sure to leave room for the front legs on the bottom bench.

Next, I stood up the two benchtops and attached the front legs. Then it was a matter of flipping it over, attaching the back legs, and then the top brace. Eventually, I will add hooks to the top support board so I can hand my tools.

Just like that, the DIY garden potting bench is done. This project took about a day to make from first measuring the wood to putting the last screw in. Eventually, I will be painting it, as that will help it last longer. If you don’t want to paint it, you can always stain or seal it. Regardless of which route you take, it is important to seal it in some way to prevent rot.

As you can see, it has already come in handy. Do you have a potting bench for your garden?



  1. This looks like a fun project! I would love to make a potting bench along with a stand for herbs. I have a great screened in area for both. Thank you for the inspiration. Pinned.

    1. Thank you. It was pretty easy to put together. That sounds like a great spot to putt a potting bench and herb stand.

  2. We’ve been thinking about building one of these. Just started seriously gardening this summer, so this may be a next year project, but it’s fun to think about! Great post!

    1. Glad to hear you are getting serious in gardening. I hope you do give this project a try at some point as it really helps a ton when planting seeds and even transplanting seedlings into larger pots.

  3. I am so impressed! Well done! You are brave with the saw. I appreciate your detailed instructions. Thanks for sharing!

    1. Thank you! The saw isn’t as scary as it seems, you just need to go slow and make sure you are doing the cuts correctly.

  4. This is something I need for my greenhouse. Thanks for the instructions on how to do this.

    1. I hope you are able to get one made. It comes in handy.

  5. It turned out great! I’m going to have to build one (or have hubby) if we keep up the gardening around here!

    1. Thank you. It will absolutely make gardening easier.

  6. I do have a potting bench and it’s invaluable but I have to say I didn’t make it! I managed to find one that was under £50 after a LOT of searching. I agree, it’s a must have for gardeners and yours looks brilliant, congrats! Lisa

    1. Oh wow, you got a steal on your potting bench! I don’t know how I went so many years without one. Thank you!

    1. Thank you! It will make a great addition to your homestead.

  7. Congratulations, yours turned out great! I have been wanting one as well, especially as I get even more into gardening in our yard. I might have to give this DIY a try!

    1. Thank you! I hope you do make one because it is so handy to have is you are going to do lots of gardening.

  8. Your new bench looks great, it must be cool to know you’ve made it yourself as well. I don’t have a dedicated bench for potting, sitting on the floor or on the back step of the garage is usually what I end up doing.

    1. Thank you! It does make using it feel more special since I made it.

  9. Your potting bench looks great! I’m using an old kitchen organizer for one, but I would love to make one soon!

    1. Thank you! Hey that’s great that you have something that works for the time being but I hope you do get a chance to make a potting bench at some point.

  10. Oh, this is SUCH a cute potting bench project!! I’m going to have to try it!! Thanks for sharing!

    1. Thank you! I hope you are able to get yours made, it really is a game-changer when it comes to gardening.

  11. I love this! I’m planning some planting for the spring, and this is right up my alley. Thanks for sharing!

    1. I’m glad you love it. A potting bench really makes a huge difference when planting. I hope you are able to make one.

Leave a Reply

Your email address will not be published. Required fields are marked *